FRP Filler Supports - pass ISO9001

large ventilated areas, light weight, high anti-corrosion and strength, easy to be installed and long life span.

        FRP filler supports are made of F.R.P pultrusion profiles constructed from glass reinforced thermosetting resin

        The filler supports posses the characteristics of large ventilated areas, light weight, high anti-corrosion and strength, easy to be installed and long life span. As a new generation of r supports, they are extensively used in the cooling tower of electric power system and get high praise.

        We have many specifications and we can also do according to your requirements.

        Use notes:

1.       The use load of the standard supports would be greater or equal to 8.5KN per square meters; 

The experimental load would be greater or equal to 12KN; The destruction load would be greater or equal to 20KN.

2.       Under the conditions of the use load, the deflection of the supports would be smaller or equal to 7.5mm in vertical direction and also the differences of two diagonal lines would be not more than 8mm.

3.       When installing, the joining length of the two plates would be from 10cm to 15cm. The joining part would be fixed in the direction of the diagonal line by the use of the stainless U shape clap.

standard of FRP filler supports (mm)
type	length	width	height	span
BT-100I-4500CR	4500	1080	100	250x300
BT-75I-4500CR	4500	1080	75	250x300
BT-70I-3000CR	3000	1080	70	250x300
BT-68I-3000CR	3000	1080	68	250x300
BT-58I-3000CR	3000	1080	58	250x300
BT-58I-2500CR	2500	1080	58	250x312.5
BT-38I-2500CR	2500	1080	38	250x312.5
BT-38I-2400CR	2400	1080	38	250x300